Woodworking is a passionate art that helps to create an aesthetic shape with a piece of wood. But an artist or woodworker doesn’t get their desire sizes or shapes from a block of wood.
A fine woodworker never wants any flaws in their masterpieces. That’s why the wood artist has to fill the gap among the pieces of wood and connect them. Installing quarter rounds is a very common incident that a woodworker has to face. Using a nail gun always is not a handy solution for all.
It is sometimes a noisy and expensive choice for you. If you are wondering how to install quarter round without a nail gun, here are some easy solutions for you. Let’s learn more about Installing Quarter Round.
Quarter Round and its Use
Quarter round is the cross-section between the two joints of the wood. Different types of woods are used as the materials for formulating quarter rounds.
Most of the time, woodworkers use quarter rounds made of hardwood softwood. But Extruded plastic and engineered wood are also used to produce it. People prefer the wooden quarter-round most of the time as it is available everywhere.
When you decorate a base of celling with woods, most of the time, you can’t match each part of wood semantically. The small gaps between the woods irritate your eye if they are not erased properly. Quarter round is used to remove the whole or gap of the woods.
Wooden crafts on the wall reflect the elegance and artistic mind of the dwellers. But you have to manage it smartly so that abrupt finishing provides any reverse impression on the mind of the observer.
The gap on that craft can destroy the whole impression of the house. You may notice the problem basically in the corner where you have to join the two parts of the wood. Proper use of it help to enhance the architectural beauty.
You never allow a visible gap in the corner of your wooden home décor. Installing a quarter round to remove the gap is not a hazardous task.
You should not leave unbounded wood in your wooden décor finishing. It will deform the whole structure, and you have to suffer for it in the long run. To avoid these sorts of probable occurrences, you have to make a covered finish to those open spaces.
With Quarter Round molding, you can hide all sorts of wooden flaws, whether it is in the baseboards or the windowsills. Moreover, it ensures longevity with aristocracy to the user.
How to Install Quarter Round without a Nail Gun – A Complete Guide
Installation of a quarter round is not a serious task to manage. There are many easy ways of installing a Quarter Round. The professional carpenters use nail guns to fix the quarter round within few minutes.
But the touch of the hand can give efficacy which you may not get from the mechanisms of equipment. Sometimes ancient ways are more suitable than the shortcut method of using a nail gun. The two most prominent ways of installing quarter round are:
- Installing quarter round with a hammer
- Installing quarter round with glue or adhesive
You have to follow several steps while installing the quarter round in your selective area. Here is the answer to your query –
Installing Quarter Round with a Hammer
If you use the hammer to place, the quarter round maintains the cautions. You can choose anyone by determining the requirement of your home décor.
If you choose to work with nails, use the most suitable nails so that the task becomes easier for you. Hammer is an old instrument of the woodworker. You can often find it in the home toolbox also. So, it will be easier to follow the manual method of installing a quarter round wherever you need.
Tools Required
- Nailset
- Pencil
- Finish nails
- Quarter round cutter
Steps
After gathering all the tools, you have to follow the following steps to execute your plan of placing a quarter round. The steps are:
Step 01.Clean the Surface
First of all, you have to target the surface where you need to use quarter round. Before placing the molding, clean up the surface and every corner carefully. Sweeping is very important to get a good finish over the wall. Otherwise, you may get an unprofessional clumsy look after completing the task.
Step 02.Shaping The Mold
It’s time to cut the mold in accordance with the measurement of the baseboard. With a pencil, point out the desired edges. By using a Quarter round cutter, cut down the pointed area in a proper size. There are some pointed scissors in the market which is specially formulated to fix up the angle while cutting things. Here you have to carefully maintain the measurement of the cutting angle to get a flawless joint.
Step 03.Setting up the Quarter Round
After cutting the quarter round at a 30- or 45-degree angle, fixes them in the wall carefully. Don’t leave any gap or distance, and focus on the fact that the molding is fixed in a particular area. Have a deep look and stop while 18-inch of the nail remain outside.
Step 04.Put the Nail
You have to put a nail in the middle. The finished nail will help you to use it faster. Now use the hammer to fix the nail in the required position of the baseboard. Have a deep look and stop while 18-inch of the nail remain outside. Now check the position of the nail, whether it is in the right place or not, and continue hammering until the nail dive fully.
Step 05.Final Touch
You have to fix up the other nails in the different required places. But you should not use it on the floor. Wherever you use the nail, try to seal or erase the mark of the nail’s top. Otherwise, it will draw the eyes of the visitors, which will be quite embarrassing. And now your quarter round is fixed up into the problematic area.
Installing Quarter Round with Glue
If you want to avoid the use of nail guns and nails, using glue will be another probable solution that you may try out. The only downside of using glue is low-quality glue can’t serve you properly. It doesn’t remain stickily on the wall. If it becomes sticky and fixed in a place, you can’t change it easily. The steps of installing quarter round with glue are:
Tools Required
- Sandpaper
- Glue
- Quarter round cutter
- Pencil
Steps
After accumulating all these tools, let’s follow some easy steps the place the quarter round with glue.
Step 01.Clean the Surface and Cut the Molding
Like the previous methods, you have to clean the surface corner and the whole area of the operation. Now measure the required sizes of the quarter board in accordance with the corner. By using the quarter-round cutter, cut it down and create an angle.
Step 02.Make the Quarter Round Ready
With the help of sandpaper, the out modifies the side of the quarter round and repeats the action some more times. It will help to adjust the glue acutely. After applying glue, fixed it in the desired position quickly. Now you have to wait for a while to dry the glue.
Step 03.Finishing Touch
After completion of the task, you have to remove unnecessary marks and spots of glue from the surrounding. Check the stickiness of the glue.
Install Quarter Round with an Adhesive
You do not need to follow a single rule of molding quarter round for your woodworks always. If glue and hammer seem hazardous, you can take the help of adhesive. There is some specially formulated adhesive that is more effective than the local glue. They can ensure long sustainability, which you may not get from normal glue. The methodologies of applying adhesive tor quarter round installation are almost the same as applying glue. The steps are:
- To use proper adhesive cleaning is a must. The satisfying stickiness of the product depends on cleanliness.
- Some adhesives required a mixture of extra elements to increase efficiency. Check them and prepare the adhesive properly to apply.
- Cut down the quarter round after measuring both the edge of the corner.
- Stuff the side of the cut round with sandpaper and apply adhesive in multiple layers.
- Then fix it to the desired place where you have to place it.
When we decided to use glue, there was a chance of not adjustment. So, try to use a high-quality wood adhesive for better results.
Things To Notice
Many woodworkers choose the option of using a nail gun to set up the quarter round. But the home dweller hardly manages it to use all the time. So manual operation is a bit lengthy, but it is affordable for all. If you want to install a quarter round by yourself, you have to follow something to avoid unpleasant situations. Here are some handy tips for you:
1.Fittings of Mold
Sometimes you need the take the quarter round outside. In that case, you have to dryness of the products before departure. Apply it in the wall carefully to remove the unwanted gaps and to lack woodwork. If you want to use glue or adhesive, try to purchase them from a renowned shop.
2.Mark Up all The Flaws At Once
While filling the gap with the quarter round, try to mark up the self-made flows when you are using the nails to adjust the quarter round. You have to notice the perfect placement of nails. But as an artist or a home décor professional, you can’t leave a nail’s head open; it will cause any type of accident anytime.
You can use some sealant on the top of the nail to erase the irritating nail’s head. Now use sandpaper to rough on the nail’s point so that it gives you a professional vibe.
3.Do it Without Splitting
The most common mistake that the technicians do is applying the nail abruptly. As a result, they have to face splitting, which creates unwanted situations again. So, try to predrill and make comfortable nailing. All these things are very crucial, and you have to notice all this very carefully. It will help to avoid any accidents and technical mistakes.
Common Mistakes To Avoid
If you trace out a certain problem in the joint of a window or a noticeable gap between two planks of wood, it will not be a wise decision to call a technician.
Though professionals come with a bag full of tools and instruments, it seems to be an exaggeration. You can easily fix the problem yourself at home. From the above discussion, you may find the answer to all your questions about the manual installation of a quarter-round molding. But, to do that, you have to avoid some common mistakes to get the desired result. These are:
Mistake 01
Cutting the quarter round is the most crucial part in both manual processes of quarter round installation. You have to maintain a scale to create the right angle to cut the molding. The cutting should be half of the total angle of the pointed corner.
Mistake 02
Try to notice the color difference that might be created by the repairing of the joint. Cover up the color so that the things don’t pinch your eye to drag attention.
Mistake 03
Don’t use local glue; rather, use an adhesive to join the two pieces of wood. If you use the local one, it would be sticky before joining the wood. If so, it would mass up the whole activities. So, to avoid these probable hazardous, try to operate the quarter round installation with great care. By maintaining the cautions, you can easily gain better outcomes than the professionals.
How To Install Quarter Round Molding With An Adhesive
- Clean and dry the area around the quarter-round molding you will adhere to.
- Apply a small amount of adhesive to one side of the quarter-round molding, being careful not to apply too much or run your fingers over the top – this will cause wrinkles in your adhesive bond that you’ll have to fix later on.
- Place the molding onto your desired surface and align it properly so that both edges of the adhesive are touching; use pressure if necessary so that there are no air bubbles between them. Hold for about 5 seconds until the bond begins to set.
- Once set, use a knife or a trimming tool to cut around the molding – be careful not to cut into the adhesive bond! If necessary, smooth out any irregularities with your fingers.
- Repeat steps 2-4 for the other side of the quarter-round molding. 6. Reposition the quarter-round moldings as necessary, then seal them with a transparent adhesive or spraying paint to prevent fingerprints and water damage.
Mistakes To Avoid, Tips & Tricks
Installing a quarter round without a nail gun can be done with a few simple tips and tricks. Here are some mistakes to avoid, along with helpful advice on how to install quarter round more efficiently and effectively:
1.Not using the correct tool
A proper quarter-round installation requires a nail gun designed explicitly for this task, rather than an average household one. If you don’t have access to such a tool, you may want to consider hiring someone who does in order to ensure an accurate installation.
2.Failing to properly pre-load the nail gun
– A common mistake when installing a quarter round is not enough pre-loading the nail gun. This can lead to inaccurate shooting, resulting in the crooked or improperly installed quarter round. To ensure an accurate and efficient installation, loading your nails before beginning work is essential.
3.Not using the proper nails
– Another standard error during quarter-round installation is choosing the wrong size for the task. Nails that are too large will not go appropriately through drywall, whereas smaller nails may cause damage along with less gluing surface area than needed.
4.Not using the suitable adhesive
– One common mistake when installing quarter rounds is choosing an incorrect type of adhesive. While some sealants work well on quarter rounds, others may not hold up as expected in the long run. Selecting a high-quality adhesive that will stick firmly to the surface and the nails used for installation is essential.
5.Not waiting for the adhesive to fully dry
– Many people make the mistake of gluing too soon after applying the adhesive, which can cause bubbling and setbacks in adhesion. It is essential to wait ten minutes or more after application before proceeding with further steps in order to allow the adhesive time to set correctly.
6.Failing to level the install
– One of the most important steps when installing a quarter round is balancing it so that there are no bumps or inconsistencies on its surface. If not done correctly, this can lead to crookedness in the final product.
Should You Glue Or Nail Quarter Round Molding?
It depends on your specific needs and situation. Gluing quarter-round molding may be a good option if you need a temporary fix until you find the correct adhesive or nails. Nailing quarter-round molding would be more permanent but could also require extra measures (such as using an acid-base sealer) in order to keep it from deteriorating over time. Ultimately, consulting with a professional is essential if you’re unsure which option is best for your specific situation.
Conclusion
Installing a quarter round is not a serious concerning function rather, it is a regular issue of the home. So, you should not invest a handsome amount on an air nailer to fix a quarter round. By following the above steps, you can choose any one of them for you and proceed to fix the problem yourself.
The instructions are in your hand, and the steps are also clear to you. All your query on how to install quarter round without a nail gun has been illustrated. Now you can Paint on the wall of the house and frame that with a quarter round. It’s your turn to create a clean, fresh, and eye-soothing finish to the corner of your home.
Frequently asked questions
1.Is manual quarter-round installation better than the instrumental operation?
Ans. Using instruments is not a worthy solution or all the time. When you need an instant solution, you can’t wait to buy other types of machinery to fix a silly issue. Again, it might not be budget-friendly. So manual fixation is always better than using the instrumental solution.
2.What types of nails should you use to fix a quarter round?
Ans. You should use a faster head nail for the whole operation of installing a quarter round. It has a thinner point that can be hidden inside the wood easily. Otherwise, you have to seal the top of the nail to avoid the accident created by the hooked nail’s point.
3.Which one is more efficient for quarter round, glue, or nail?
Ans. The efficiency of the woodwork can be determined by the long-lasting duration of the work. If the joint comes in its previous position, the efficiency of using materials is questioned. So, to get a long durable finish, you can use the nail to fix the defective joint.
4.How to mark up the right angle for setting a quarter round?
Ans. The most important task of the installation of a quarter round is to fix up the right angle. It will be tough for you if you want to handle it manually. You can use a digital meter scale to trace out the correct angle and cut down the quarter round.
5.Which materials should be used to erase the mark of the nails?
Ans. Sealant is an important thing that you must need to use to erase the unwanted makes of the nails. You can use chalk too to erase the make. But make sure that you apply the sandpaper to the sealant to get a smooth texture.
Leave a Reply