When you go to make any fence pickets, nailing on them is the first thing that comes to mind. But stop. Would you have nailed depth on the fence using the right tools? Nailing on the fence is good to go.
Yet, if you mistakenly choose the wrong one, all the efforts you put in go in vain. Again, nailing on the wood fence incorrectly makes them weak, pale, and unstable.
Here, you should prioritize the right one. Hence, it’s pretty challenging to find out the best beast of nails. That’s why we pretend this guide is about the best nails for fence pickets. So, let us get started.
What Type Of Nails To Use For Fence Pickets?
All types of nails aren’t suitable to use on the fence pickets. The fence isn’t as strong as the wood.
Nails with a bigger size won’t be workable to withhold onto the fence. You should keep in mind that each kind of nail has some specific characteristics.
It is proven that when the wrong type of nails is installed into the fence. The whole area becomes damaged and expands while it gets wet and dries out.
Using the galvanized material, which is well-constructed with the electro galvanized or hot-galvanized materials, are good for emitting corrosion. Some would like to use 6-inches ring shank nails to fasten or prepare the pickets.
But the standard option is to use any stainless steel-made nails to avoid any rust or unnecessary marks upon the wood.
On the contrary, galvanized nails are very ergonomic, stylish, and lightweight to hold power in-depth on the wood.
Best Nails For Fence Pickets Reviews
When it comes to choosing the best nails for fence pickets, there are a few factors to consider. First and foremost, you’ll want to ensure that the nails you choose are suitable for outdoor use and can withstand exposure to the elements.
Stainless steel or galvanized nails are often recommended for this purpose, as they are resistant to rust and corrosion. Additionally, it’s important to select nails that are the right length and gauge for your specific fence pickets.
Nails that are too short may not provide enough support, while nails that are too long may split the wood. It’s also a good idea to use ring-shank or screw shank nails, as they provide better holding power than smooth-shank nails. By selecting the appropriate nails for your fence pickets, you can ensure that your fence is sturdy and built to last.
Metabo HPT 1-½ inch Coil Siding Nails
Specifications
Size : 1-1/2-Inch x 0.092-Inch
Head Style : Flat
Measurement System : Metric
Material: Dipped galvanized
It’s the best coil siding nail used for improving the hitting skills. Metabo HPT nails are a good weapon to reduce friction against the force. The best galvanized materials are used for artistry.
You can compare these nails with Makita, Bostitch, and the 15″ inches coil nailers. It’s great to know that Metabo nailers can handle the weight of heavy materials.
Unlike this, these components are compatible with the 15″ inches coil nailers, which can manage to weigh 21/4-inches nails.
This little tool can work great with nail guns. There are fewer chances to face jamming. It can sit up on the 2× handle comfortably. Nothing is good like this, as it is free from all sorts of splitting. Metabo is an ideal example of saving time.
Metabo nails are designed to use for cedarwood. These are good to go with this because of their utility and lack of any misfortunes. With the ideal size, around 15″ inches is excellent to use for installing the wood.
As we know, freeman guns tend to double fire, and pulling them out is often difficult. These nails work great to fix those issues without any trouble. You’ll never be able to face any misfires or metal sticking issues.
Highlighted Features
- Manufactured with the galvanized coat
- Well-engineered on high-profile standards
- It works great on guns
- You may get great trouble-free nails
- The tool was super handy
Downsides
- Not mentioned
Grip-Rite Prime Guard Collated Nails
Specifications
Size: 2″ x 0.113″
Material : Steel
Head Style : Flat
Measurement System : inch
Although these fasteners are more expensive and easy to galvanize with siding nails, these won’t rust and do not mark as well as never exposure to cedar.
Along with these cedar fences, you may notice some ‘tears’ black, which careers down during repainting the joints.
This is the main reason for economic galvanized fasteners eroding due to the reaction of a cedar. These stainless-steel fasteners will be able to overcome those issues without any coastal effects.
It’s an ideal tool to use in the pocket of cedar installations. Grip right nails have been suitable for nailed down perfectly on Bostitch n80cb guns.
The plastic strip with the collating nails is thicker and sturdy to use. You can exemplify this as an ideal ring shank galvanized nail gun.
This masterpiece is well constructed to use in the 21⁰ round-headed framing nails. The most relevant part about this item is that it comes in a box with the average framing nails.
These items help them to run their projects without any hassle. These collated nails have incredible holding power.
Working ability is outstanding, as they seem to act fine in the old harbor freight central pneumatic nail gun.
Highlighted Features
- Able to perform well for round head framing nails
- Well-manufactured for 21⁰ nails that come in a good packaging
- Suitable to use exterior use as well as other lumber
- Comes at an affordable price
- Facing less trouble during collation
Downsides
- Comes with bad packaging from the retailer
- The plastic strip can often cause misdeeds in the gun
Hitachi 2 In X Ring Shank Nails
Specifications
Size: 1-pack
Material: Plastic
Head Style: Flat
Measurement System: Inch
In terms of nails, the main objective of the installation part must be easy and comfortable. Hitachi 2 in X 0.113 ring shake is ideal to use in that case.
It’s a good beast for the folk who’re in search of an alternative to nail for installing fences around the yard.
One similarity here you can find with other stuff, it works finer to install the fence. These are working so even, especially on the cedar fence.
Though Hitachi ring shank nails are considered more effective for wood, they may still be used to provide a superb finish. Repairing the salt-treated fencing and shed siding is the main focus of these galvanized nails.
Well finished, and weighing the tools properly is the main task of this. When they’re used in any machine, there are fewer chances of any misfire or jamming.
They didn’t hit improperly towards the wood. Steel, plastic, stainless steel are the main elements of these tiny nails used to construct this item.
Due to the galvanized finish, most of these items are freed from all kinds of rust. They did a great job when used in rigid framing nail guns.
In short, Hitachi is supposed to be the second name of Metabo HPT with a new look. They look too sharp like a needle.
Highlighted Features
- Used as an alternative to a hammer or any nails.
- Works great on cedar fences
- Provides smooth and even result
- Always give damage-free outputs
- Made with some solid materials like steel, plastic, etc
Downsides
- Some customers have found bad quality packaging
- Most of the user complains about feeding problems towards the gun
Nail Pro 2″-inches Full Head Nails
Specifications
Material : Type 304 Stainless Steel
Item Package Quantity: 1000
Measurement System:Inch
With a mind-blowing performance, Nail pro is a champ to feed 21⁰ plastic collated nails. Easy to install, load, and also durable to be fitted on any nail gun. Due to the well-constructed finish of stainless steel, it can work correctly.
You can run these nailing pins according to your needs. With one box, there are 29-30 pieces available to finish the job idle.
They are well enough to perform like a pro. Moreover, it’s a fantastic nail only for finishing the work flawlessly.
Most importantly, it has enormous power to hold the nails. Comparatively, this product has got to go further than others.
These nails can efficiently protect you from natural calamities, unlike earthquakes, hurricanes, storms, tornadoes, etc.
Emphasizing more on the topic, we learned from the reviews that it seems very efficient and can hold too tight. Again, being stainless will make a way to increase their longevity.
Highlighted Features
- It has strong holding power
- Very skillful for load and use
- The durability makes it efficient to provide more extended services
- Helps to give a strong shelter during natural calamities
Downsides
- The nails aren’t statable for low-profile coating.
Grip-Rite Prime MaxC62878 Guard Ring Shank Nails
Specifications
Material: Type 304 Stainless Steel
Item Package Quantity: 1000
Measurement System : Inch
You may not spend money on something that is of no use to you. The same things depend on these nails. The features and functions of this component’s little similar to others, but it’s worth your money.
We say they’re trustworthy for their excellent performance and quality. Using them with a framing nail gun is required for the first investment of it.
Theming a framing nail gun is a kind of activity, only useful for handling a private fence project.
In some cases, these nails are outstanding, made of 304 stainless-steel materials. As we know, it is a high-quality material for making durable and dense materials. So, think again before investing your money through other products.
Let’s jump onto the next features of these nails. The reasons for its excellence will be made clear to you when you see its price. It comes at a very cheap and affordable price.
With the coat of hot-dip galvanized, it’s super comfy for picket fences. Most of these nails are rustproof and damage-free, made with stainless steel. It is a perspective issue for these nails.
Using this on cedar wood is quite familiar, like other products. For the presence of galvanized issues, it can hold and tight the objects strongly.
The nails come with a nice package covered by plastic buckets. It doesn’t get smashed to hold their position roughly.
Highlighted Features
- suitable to cover up large fence project
- There are no discoloration issues for using over time
- Galvanized nails perform great on both cedar and picket fences
- All the materials are rustproof
Downsides
- Holding power isn’t sufficient compared to its rivals.
Grip-Rite Prime Guard Stainless-Steel Siding Nails
Specifications
Material: Stainless steel
Shank Type: Ring
Item Package Quantity : 1
You must have agreed with this; stainless steel is obvious to cedarwood. Unless galvanized or bright coated, nails may create unnatural marks or chemicals that react on the wood.
Even after that, if you wish to build a new fence door for replacing it with an inoperable door, this grip ring shank of stainless-steel nails works to put the door together.
Some carpenters pretend to use the 15-degree siding nailed from a local box store, which may charge under $30.
But we advised you to be aware, as there they only allow you to set up 100 nails or 500. Nothing is vulnerable like this except wasting your efficiency and time.
Even though they are more reliable for making expensive cedar fences for production houses, they prefer to use stainless-steel ring shank nails for attaching the fence boards to these outdoor fasteners.
It’s just because these are the only products that won’t exude nasty streaks of corrosion down the wood.
However, jamming and misfiring may hamper the work of nailing the fence. Thankfully, these nails are free from all sorts of issues like this. To make you comfortable at work, there are no unrivaled nails.
Hence, they’re able to save time and complete the projects in the required time. It’s a rolled base nail that can be loaded as viper-like coal.
Highlighted Features
- Having the ability to finish work on time.
- Freed from jamming and misfire
- Good to go on cedarwood
- Fulfill all the requirements of the projects
- Gives a smooth finish
Downsides
- Not required to use on some Bostitch and Hitachi siding nails.
Is It Better To Use Nails Or Screws?
They choose the right nails or screws to use when fencing is a personal preference. Ultimately, the best method for you will depend on the fence you’re fencing, the post size, and the weather conditions.
If you’re using screws, ensure they’re correctly installed and that the holes match up perfectly with the picket posts. They’re stronger, so they can last longer and hold up against weather conditions better than nails.
There’s some debate about whether nails or screws are better when it comes to fence pickets, but nails are generally considered the better option.
Which is better – nails or screws?
Deciding which type of nails or screws to use when installing fence pickets can be daunting. That’s why we’ve created a buyer’s guide to help make the decision easier. First and foremost, nails are better for wood that is not too thick. However, screws are better for thicker material.
Nails also galvanize to prevent rust, while screws are not. If installing fence pickets with nails, use galvanized spikes to secure them. And lastly, make sure to read our nails vs. screws reviews to get the best advice for your specific needs.
Which fasteners are best for a wood fence?
There’s nothing worse than a fence that’s constantly moving or rattling. Thankfully, installing fence pickets with fasteners is a breeze. The most general type of fastener is the screw, which is strong and easy to install. A few different types of fasteners can use for wood fence pickets, each with its benefits.
For example, the ledger strip will hold the boards in place while the screws slowly tighten, eliminating any wobble or rattling from your fence. If you need to quickly secure an anchor point at a particular spot on your fence, the eye bolt may be the perfect option. Finally, if you’re looking for a more durable fence, you can use the nail.
Though it’s a more time-consuming option, the nail will hold the fence boards in place for longer. So, whichever fastener you choose, consult the best nails for fence pickets reviews and buying guide to get the perfect pick for your needs.
Types Of Nails On Variety Of Wood
You should keep in mind that all kinds of nails aren’t suitable for all wood types. There are a few variants that rely on these facts. So, below we discussed these affairs in detail.
Cedar Wood Types
With the extreme finish of galvanized, polymer coat, double hot-dipped bronzes are good for using this wood.
Cedar-made fences are usually quite soft and will let you bury the nail; sometimes, it’s deeper and should be puttied. For more inquiries, you can ask Carpenter. They will use it to shoot and run if possible.
Hence, cedar fences are made with putty; it’s best to use galvanized screw-type nails. However, galvanized wood wasn’t easy.
The screw or twister will not pull out over time. It was also freed from the expansion and contraction of both the heat and cold.
Pressure-Treated Pine Wood
Pressure-treated pine woods deserve high-profile nails. Although it uses preservatives and there’s a high chance of any adverse reactions occurring with this. But don’t worry, it only happens to some specific materials.
With the reaction of this, the nail corrodes or dissipates. In that case, we recommend using hot-dipped galvanized wood except the decking.
Some also prefer to use stainless-steel screws for their fewer disadvantages. But they fail to act like coated steel screws which used to attach with the decking boards.
Stainless steel-made nails are well enough to use ice melt products. It is good to use 20d galvanized nails for this sort of wood.
As the second choice, you can give before hot-dipped galvanized, silicon bronze, or polymer-coated.
However, their prices aren’t going to be the same. Somewhere you may need to pay high. So here you should give prior the best one that matches the needs.
Non-Pressure Pine Wood
The name non-pressure refers to many things here. As the name suggests, you do not have to give pressure to nail it. They usually accept zinc plated steel or other typical nails.
These pinewoods are highly used on fence projects for their high density and lightweight. A pine is a good example of resisting shrinking and swelling because it is freed from rustic patina.
Apart from the quality, this wood is also super water-resistant. This pinewood can stand for simple surface coloring from age.
Why Should You Nail Or Screw Fence Boards?
When choosing a better one among the nails or screws, people usually go for nails. In a simple word, nails can never beat a screw. But screws can be the right choice as an alternative.
Anyway, nails will ensure to ease the rework if there’s a necessity to replace the damaged picket. However, you can use both nails and screws on the wood fences. But the screws require more time to install than nails.
You can use both screws and nails on the wood, as they will perform finer and even hold their positions. Some people pretend both of them to attach the pickets to the back rails.
Nails are more likely than use screws, as they used to grow loose over time. But you have to believe that screws are more incompatible with the safety issues than nailing.
In the case of durability, it can be seen that nails win over the screws.
Factors To Consider While Choosing Nails For Fence Pickets
A damaged and rust-free fence picket is a dream to many of us. But when you’ve failed to choose the suitable one, the problem arises from there.
Nailing the wrong components on a fence surface makes your dream garden fence pale and weak. To avoid this, consider these below factors during choosing any nails for the fence.
Nail Coating Types
There are three types of nail coating available- bright, galvanized, and stainless steel. As each of them has different characteristics, you should be aware of choosing them.
Bright
Bright nails are less effective in installing any heavy-duty projects. They have a high chance of being affected by rust and corrosion. All in all, most of them have no surface coating.
So, when you go to install them on the fences, they might expose their elements badly. Bright nails must be reliable to use for internal interior or low profitable projects.
Galvanized
Galvanized has been a popular choice for a wide variety of nailing fences or pickets. Coming with a hot-dipped coat of zinc, these fasteners offer features like a smooth finish, free from rust, and suitable to use for all sorts of fence applications.
Stainless Steel
Stainless steel nails are truly effective for customizing any kind of wood or fence. These nails come with 10% or more chromium and ordinary steel.
Mention not, chromium is a good source of molten states, which create a powerful barrier to reduce rust from the metal.
For this, stainless steel usually lasts for decades and is easily the best nail for fence pickets. These refer to the expensive one but paying for themselves is worthy.
Fences that are supposed to be installed in a coastal area should go for this because it offers sufficient protection against the salty sea air.
When to Use Round Shank & Round Wire Nails?
Round Shank
The round shank is a way that stands to hold power substantially. It has ridges or spirals to increase the power indeed.
Either it is strong to hold power, it is also effective in reducing friction to prevent the nails from falling out over time.
When using these sorts of nails, it is highly recommended to attach rails to rails. Doing this norm will help to provide additional power to hold.
Round Wire
It has an almost smooth shank to make a way to drive the wood efficiently. They contribute more strength compared to the shank. It could be used on some rare areas that will not be seen.
Fastener Length
The main purpose of nails on the fence is to bind them together. But fastener length is crucial in these affairs for finishing the task successfully.
Anyway, some people like to use glues or joinery and prefer to put the nails smaller. Whether it is relying upon the job and the thickness, materials of the trim, try to attach 1/2length of nails for each piece to drive into the deep.
Nail Types
As we know, nails are used for various purposes. Fence pickets here bind them to categorize into five. Particularly, those nails are different from each other in their characteristics and features.
However, knowing the difference between them helps you to decide the right one for your job.
Standard, box, nails, aluminum, zinc, brass, copper are used for nailing on the fence pickets. So now we are going to learn about them vividly.
Common Nails
Common nails mean the basics that are usually used everywhere. But they are the most demanded tools in the field of construction, high-end projects.
They are easily recognized by their thick shank, wide round head, and thin silver body. Despite their excessive thinner body, they are very strong and efficient to work.
Correspondingly, common nails are infamous throughout the carpenters, woodworkers for preventing the wood tip from splitting.
They excel at tearing the wood fibers from the tip. As a result, it will be able to hold the strength against the slight reduction.
Box Nails
In general, it’s hard to differentiate both the common and box nails distinctly. But box nails are best suited to thinner wood materials (unlike ¾” thick lumber) due to their thinner shank.
Their holding power is the same as the common nails. For this, these are unsuitable for any critical or demanding projects.
Duplex Head Nails
Duplex head nails are also known as scaffold nails. It is because these heads usually have two heads at their top.
With the unique configuration, it can finish any kind of temporary construction. Installing these sorts of head nails is a little difficult.
Because here, you need to hammer it until you’re sure the lower head gets flushed underneath the wood.
At the same time, if you need to remove it, you’ve to hold the top head with a pull bar. Or, you can use the hammer claw as an alternative.
Then push the top head of the nail using them. The pin will be coming out securely after this.
Ring Shake Nails
Ring shank nails look like an annular ring. To ensure the additional gripping, this ring is on its whole body. The twisted-pair body of this nail has a wider head at the top.
The main purpose of using these nails for installing the sub floor. As they can hold additional power for reducing shrinking. Similarly, deck boards and dry board nails also have rings on their body to hold more strength.
Brad Nails
Brand nails have a thinner body and a thicker head on their top. The technician, the Carpenter, uses them for light finish projects because of their tiny size.
You’ll face less complexity (like splitting) by installing them on the hardwood. Brad’s nails are good to make the joinery task.
They significantly make holes when you’re installing them on any hard surfaces. To fill the holes, you need to add some putty there to bring a smooth finish.
Siding Nails
Siding nails are normally used for the siding works. Due to the galvanized finish on their body, they’re rust and corrosion-proof equally. But using specialized siding nails is necessary to drive these nails into any fence or wooden back.
Lost Head Nails
As the name suggests, lost head nails usually have a tiny head on their top. But that doesn’t mean they’re less effective.
Actually, without a head, these little components are more useful for doing any high-end projects.
Lost head nails are particularly used for those projects where hiding the nails head requirements should be maintained strictly.
It may sound good when you use them to drive into the woods using a trigger. But you need to punch them deep into the plank wood for a long time. Using them to fix the laminate woods is better and more efficient.
What Size Nails For Fence Pickets?
Size requirements for the fence here rely on the fence types. Certainly, fence pickets and railings are the other most crucial factor used to define the sizes.
These vital two facts of fence pickets and railings have signified the wood’s size and thickness. Before discussing the nail sizes, we think it’s better to simply touch upon these two affairs.
Differences Between Picket vs. Palings
Pickets are the sizes of fence poles with an adequate measurement under 1-½” inches with the rounded or pointed top at their bottom.
On the other hand, palings refer to the flat body of the fences. On this flat body, we used to fix on the cross rails or by using the stringer.
So when someone talks about the fence pickets, they’re usually insisting on this flat body metaphorically. However, below we attach the nails sizes by our depth research to make the task easier for you.
Nails Type | Sizes | Using Purposes |
Galvanized Round Wire | 30 mm | Cutting down for the fence frame panel |
50 mm | For creating traditional parasite systems | |
75 mm | • For nailing board to post
• Fix the gravel board to rails, • Repair the feather board fencing system • fix/ decking the joints of posts • Fix or nailing the fence to attach rails for posting and strapping |
|
100 mm | • used for posts and rails
• For attaching rails to post on the kissing gates • Used for making a joint of chestnut fencing system |
|
Stainless-Steel Ring Shank Nails | 50 mm | Used to attach pales to rails on the traditional feather board purposes |
1-1/4″-1-¾” inches for long screws Or,
1-½” inches |
Used to attach individual pickets to the back rails |
Final Wrap
Without nailing the fence with the right tool, sometimes you broaden the works of your project. It may delay the work to finish in time.
You must choose the best nails for fence pickets to avoid those issues. It’s important because natural calamities can strike any time on the fences, doors, or barriers.
These nails are well-constructed to hold the fence pieces strongly. Rust and corrosion are the main foes of those steel-made tiny nails. So if you want to escape those issues, galvanized or stainless steel coated nails are a must.
Frequently Asked Question
1.Can You Use A Framing Nailer For Fence Pickets?
Ans. Fence pickets are only required to use 8d nails. These are the particular tools used to drive nails of this size.
Without choosing the nails with heads except straight, you won’t be able to move the boards for a fraction against the heads.
2.Is It Good To Leave A Gap Between Fence Boards?
Ans. Wooden boards are usually expanded in size for impacts of moisture. For this reason, the board may get a wrap.
To avoid installing them too tight. It is required to keep a 1-½”inch gap between the fence boards to overcome these issues.
3.How Many Nails Should I Need For a Per Fence Picket?
Ans. Two nails per fence picket are good enough to create a strong barrier and support privacy. It is also suitable to pay good support towards the fence.
Leave a Reply