Deglosser is a chemical agent. Using deglosser on kitchen cabinet is found in a plastic bottle with instructions written on it but not in detail. It is often called sander liquid deglosser or liquid deglosser, whatever you want to call it.
Liquid deglosser can be used all around the house on all furniture, including the doors. It can work on polyurethane, varnish, paint, lacquer, and many other coatings. So, how to use deglosser on kitchen cabinet?
To prepare the cabinet for deglosser, you should keep in mind to clean the surface beforehand. You may also use a degreaser in the case of kitchen cabinets because the kitchen cabinet tends to collect a lot of grease from all the activities done in the kitchen.
You may also need to unscrew the whole cabinet for your convenience. The work is relatively easy as it does not need any equipment except for a piece of cloth or rag and some precautionary tools for the eyes and the hands.
How To Use Deglosser On Kitchen Cabinet- All The Required Steps
The use of deglosser is cost-effective as it does not need many accessories. So, you have to pay only for the deglosser chemical instead. They can cost from 10.99 $ from Amazon to 17.19$ from Walmart. The deglossing does not take a lot of time.
You may need 5-10 minutes to rub the deglosser on the surface depending on the size of your cabinet and 15-20 minutes to let it dry. So, it may take up to 30 minutes to finish the whole task. The extra tools you will need are some rug or cloth to apply the deglosser and some cloth to maybe wipe it off afterward. You may also use a brush to apply it if it feels convenient.
Steps On Using Deglosser On Kitchen Cabinet
Now let’s see how you can apply deglosser step by step.
Preserving The Floor
While deglossing, you must keep in mind the surroundings. In this case, the floor is the primary concern. Remember, you are dealing with a chemical substance that can discolor any paint or varnish.
It can very well damage the color of your floor regardless of its material. So, you must take steps to protect the floor before starting to do the job. To perform the task, you need to disassemble the cabinet parts and put them on the floor for your operation.
Any accidental spill on the floor can damage your floor. You can use builder paper to cover the floor first and place all the cabinet parts over the builder paper. You may use frog tape to adhere the paper to the ground. The builder paper is cheap to buy and can be reused later for other purposes.
Disassembling The Cabinet
Disassembling the cabinet is a convenient way of applying the deglosser. You can expect to apply a liquid on the cabinet and not drip it over the floor. Also, you cannot reach all the places on the cabinet if it is attached to the kitchen. You cannot also see where to apply correctly. Drying will be much easier and faster if all the parts are disassembled.
You have to unscrew all the screws one by one carefully. Though it can be a little stressful and annoying to do that, it is a necessity. You might also want to remove all the hinges for uninterrupted applying of the deglosser. It will surely help with the precision of the work.
Prepping With TSP
You may want to clean the surface of the parts of the cabinet with the help of TSP before applying the deglosser. TSP is Trisodium Phosphate. It is a strain, grease, and oil remover.
As mentioned earlier, your cabinet is subjected to many grease and oils from the daily kitchen work. It is more effective to use a deglosser on a clean surface to get the maximum result.
There is little chance to clean the cabinet parts afterward of applying the deglosser. You can soak a rug or a piece of cloth in TSP and apply it to the surface. You may move the cloth in a circular motion to get the most out of it.
Arranging Hardware
First, it may not look like a lot, but after disassembling all the parts, you will find a lot of wood parts along with many screws and hinges lying all over the floor. It might be hard to keep track of all those. In this case, you can mark those using pieces of paper, sticky notes, or tapes. Keep the respective screws and hinges of different parts close or on top of each other.
Applying The Deglosser
Now, it is time to apply the deglosser on the parts. You only need two pieces of rugs or clothes to do the job. But before that, be sure to take precautions. Before applying, wear hand gloves and goggles to save one-self from unwanted accidents. Keep the doors and windows of the room open if you are not doing it in the garage.
- Soak the rag or cloth in deglosser by holding it to the open mouth of the bottle.
- Keep rubbing the surfaces with the soaked cloth multiple times. You may want to rub it in a circular motion to make the best of it.
- Fold and refold to use different parts of the cloth so that the collected paint, grease, or dust does not get recycled in the process.
Let It Dry
Now, you must let it dry for some time. The ideal drying time can be 15-20 minutes. Do not apply the paint or varnish before drying because it may mess things up, and you will not get the optimized result in doing so.
Wipe Off
It is recommended to wipe off the remains of the deglosser after you have finished applying it. Even after 15-20 minutes of drying, some stubborn chemicals will remain on the surface.
Use another clean piece of cloth to rub away at the surface to finish the job gently.
Designing The Full Kitchen Cabinets Including The Deglosser
Kitchen cabinets are most probably the most used piece of furniture you have in your house. They are regularly used multiple times a day. Your kitchen cabinet has to face immense stress daily from the stove’s heat, spilled water, and other liquid stuff from the kitchen.
So, your kitchen cabinet is most susceptible to damage and discoloration. You will often find yourself thinking of establishing a new cabinet. Perhaps you have thought of an alternative of varnishing or painting the old cabinet to make it look presentable and pleasing to the eyes. Before painting or varnishing, you need to prep the area with deglosser or sandpaper.
Cleansing
Cleansing or cleaning is an essential step in maintaining the kitchen cabinet. The kitchen cabinet is subject to many kitchen stuff and requires cleaning. Furthermore, if you intend to degloss or paint the cabinets, you must do the cleaning first.
Cleaning will help you remove all the kitchen goo and prep your cabinet for the deglossing and painting. Before cleaning, you may want to know if the cabinet material is wood or laminate.
You can choose soap and water to clean the cabinet. Mix water with the required amount of soap to scrub off the grease and dirt with a cloth. You may also mix one part water and two parts baking soda.
Deglosser
Deglosser can be a great alternative to sanding. Degloss removes the old paint or varnish so that the wood surface can be repainted or re-varnished. In the case of choosing a deglosser, you should choose one that says “liquid sander”.
In addition to paint and varnish, it can remove other unwanted adhesives like polyurethane. This method can give you the quickest action at the cost of the lowest labor effort. You may finish all the work within 15 minutes.
Priming
Priming is another step in preparing the cabinet for painting or varnishing. Priming smoothens the surface of the cabinet and makes it ideal for adhesives. It will also assist you in getting the desired color of the paint that you used. But you have to keep in mind that the primer you are using is suitable for the paint you will be using later on.
Staining
All the works were leading up to this stage. Now, you must stain or paint your cabinet. Staining or painting will give your cabinet a newer look and will remove all the stains and scratches, if any, present.
A well-deglossed surface would give you an excellent outcome, and the result will speak for itself. You may require multiple coats of paint. Dark cabinets may need up to four coatings, whereas dark baseboards may require up to three coatings.
The selection of good paint is also a must to get the maximum result without sanding.
Varnish
Varnishing or glazing your cabinet is going to add a new dimension of color to your cabinet. It is going to make your cabinet look much more attractive.
You have to choose between oil-based glaze or water-based glaze according to the material of the cabinet.
Choose water-based glaze for painted wood. If you can mix the right latex paint with the glaze, you can customize the glaze. Use any brush or cloth to apply it. Be sure to give time for the glaze to dry afterward.
Tips
Here are tips that you should remember while doing your task.
- For any purpose, do not stack your parts of the cabinet after you have painted them. The paint may be damaged.
- Be careful of the run-offs of the paint. You can paint the sides so that the paint can run off toward the back and be invisible.
- While sanding, you can sand between coats which will give you a smoother finish.
Importance Of Liquid Sander Deglosser
Deglossing the cabinet is essential in preparing the cabinet for any varnish or paint job. Liquid sander deglosser can be used on many surfaces, including polyurethane, varnish, lacquer, and enamel.
By using it, you can reach the whole surface, including the corners. Removing the paint from the surface is not necessary if you use a liquid sander deglosser.
It smoothens the surface of the wood and makes it ideal for applying adhesive, paint, or varnish. Paint does not come off quickly if it is used. It removes the glossy layer from the surface, as its name suggests.
Water-Based Liquid Sander Deglossers
When it comes to kitchen cabinet gloss, there’s no need to go the harsh route. Of course, a deglosser can remove the shine from your cabinets in a hurry.
But there are water-based liquid sanders that are soft enough for your daily use. Also, they are affordable and easy to use. So you can get the job done quickly and with minimum hassle. Here are some tips on how to choose the right deglosser for the task at hand, as well as how to use it to achieve a flawless finish:
- Choose the appropriate deglosser for the type of sandpaper you will be using.
- Use short, consistent strokes to achieve the desired finish.
- Apply the deglosser to a cloth before using it to avoid staining your wood cabinet doors and surfaces.
- Allow the deglosser to work its magic for a few minutes before wiping it off.
- Follow up with a coat of wood conditioner if desired.
Biodegradable Formula
Cooking can be a messy affair, but it doesn’t have to be! Deglossing kitchen cabinets with a biodegradable deglosser is the perfect way to clean them up quickly and easily.
Simply wet the deglosser cloth and apply it to the cabinet surface. The deglosser is made with a biodegradable formula. So it will decompose over time and leave your kitchen cabinets clean and shining.
Let the deglosser work its magic for about 10 minutes, then rinse off well with water. No more greasy fingerprints or smudges on your cabinets – kitchen cleaning has finally become simple and easy!
Using Liquid Sander Deglosser Is Better Than Traditional Sanding
Both use liquid deglosser, and sanding is a way to prep your cabinet’s surface for any painting or varnishing job. But, using a liquid sander deglosser can very well be a better choice than sanding. Here is why.
Deglossing is a more straightforward job that requires much less time and effort than sanding. It does not leave residues. It is also safer.
As it does not create a lot of residues like sanding, which creates many small particles of wood, it is not harmful to your respiratory tract and the surrounding.
A little precaution of wearing gloves and goggles will suffice during application. It is also a lot safer for your cabinet itself if it has intricate details on it.
Sanding is mainly used for smoothing the surface, so it may not be the right choice as your cabinet is already smoothened.
Sanding will leave you with a heavy mess which will be challenging to clean and not friendly to your respiratory tract. It will also take a lot of time and effort to get the work done.
It may also ruin the complex design of your cabinet. So, analyzing all the facts, it is safe to say deglossing is better than sanding.
How Deglosser Works Fast
Deglossing involves a chemical agent containing methyl acetate, mineral spirits, toluene, etc. The combination of chemicals gives it a great advantage of fast working capability.
You do not need to wait and work for hours, just like in the case of sanding. You may apply the deglosser on the surface of your cabinet and other accessories and wipe it off.
The only time you need here is in case of rubbing in order to get the paint and varnish off and wait for it to dry. You may want to wait for 15-20 minutes to make sure it is dried thoroughly.
After that, you may apply your paint or varnish and continue your work. You may need up to 5 minutes to scrub the surface with your rag or piece of cloth, depending on the surface area, to make it work effectively.
So, the whole process will not take more than 20-25 minutes before you can start working again on it.
Safety Measures
- The chemical used in deglosser is flammable, so keep it away from any flames.
- Wear safety goggles so that accidental spills to the eye do not occur.
- Wear safety gloves so that it does not create irritation to the hands.
- Make sure the doors and windows of the rooms are often to ensure ventilation.
Ease Of Application And Coverage
If your kitchen cabinets are looking a little grubby, deglosser is the perfect solution. Not only is the deglosser safe for human and pet skin, but it’s also easy to use – just spray it on and wipe it off. Plus, it covers a large area quickly, making it a great choice for kitchens with a lot of cabinets.
If you’re looking for a stain remover, deglosser also has that covered – just be sure to test the deglosser on a small inconspicuous area first to make sure it won’t cause any damage.
Finally, deglosser can use as a degreaser, which is great for removing stubborn kitchen cabinet stains. So, what are you waiting for? Apply deglosser to your kitchen cabinets today and see the difference for yourself!
Final Words
You may assume deglossing is a hard job if you are inexperienced with it. You may also be skeptical of its effectiveness. We can assure you that it is the better choice in prepping the cabinet in terms of effectiveness and safety.
It is a much easier and time-friendly way of removing the paint or the varnish of your used cabinet.
We hope that you have now learned how to use deglosser on kitchen cabinet after reading the following steps mentioned above and, keeping in mind the precaution and trusting the process.
Frequently Asked Questions
1.Which Is Better, Deglossing Or Sanding?
Ans. Definitely, deglossing is way better than sanding. If you have a smooth cabinet surface and want to keep it that way, it is highly recommended to avoid sanding and use deglossing.
It will create a lot less mess. It is time-friendly, requires less labor, and has less possibility of damaging your beautiful cabinet.
2.Do I Have To Do Sanding After Deglossing?
Ans. Sanding and deglossing are parts of prepping the cabinet surface for further operations like painting or varnishing. If you use a deglosser, it will smoothen the surface enough.
It will also make the previous paint or varnish light enough to not interfere with the newly applied paint or varnish. So, you do not need to go through the laborious process of sanding again.
3.What Is A Liquid Sander?
Ans. Liquid sander is a chemical used on furniture for preparing them for paint or varnish. It discolors the previous paint or varnish and smoothens the surface.
4.What Is A Deglosser?
Ans. Deglosser is a chemical that contains naphtha, isopropanol, mineral spirits, ethyl acetate, and toluene. It can remove paint and varnish. In addition to paint and varnish, it can remove other unwanted adhesives like polyurethane.
5.How To Use A Liquid Sander?
Ans. Take a clean cloth or rug. Soak it with the liquid sander and rub it in a circular motion on the surface of your furniture.
6.How Long Should Liquid Sander Sit?
Ans. The time can vary according to the product used and the surface on which it is used. It can take up to 10 minutes in standard conditions and materials.
7.Do I Need To Disassemble The Cabinet?
Ans. Yes. It will be a convenient way of applying the deglosser and letting it dry.
Leave a Reply